Materials For Bone Tissue Engineering Research Articles

Enhancement of Bone Tissue Regeneration with Multi-Functional Nanoparticles by Coordination of Immune, Osteogenic, and Angiogenic Responses.

Inorganic nanoparticles are promising materials for bone tissue engineering due to their chemical resemblance to the native bone structure. However, most studies were unable to capture the entirety of the defective environment, providing limited bone regenerative abilities. Hence, this study aims to develop a multifunctional nanoparticle to collectively control the defective bone niche, including immune, angiogenic, and osteogenic systems. The nanoparticles, self-assembled by biomimetic mineralization and tannic acid (TA)-mediated metal-polyphenol network (MPN), are released sustainably after the incorporation within a gelatin cryogel. The released nanoparticles display a reduction in M1 macrophages by means of ROS elimination. Consequently, osteoclast maturation is also reduced, which is observed by the minimal formation of multinucleated cells (0.4%). Furthermore, the proportion of M2 macrophages, osteogenic differentiation, and angiogenic potential are consistently increased by the effects of magnesium from the nanoparticles. This orchestrated control of multiple systems influences the in vivo vascularized bone regeneration in which 80% of the critical-sized bone defect was regenerated with new bones with mature lamellar structure and arteriole-scale micro-vessels. Altogether, this study emphasizes the importance of the coordinated modulation of immune, osteogenic, and angiogenic systems at the bone defect site for robust bone regeneration. This article is protected by copyright. All rights reserved.

Recent trends in bone tissue engineering: a review of materials, methods, and structures.

Bone tissue engineering provides the treatment possibility for segmental long bone defects that are currently an orthopedic dilemma. This review explains different strategies, from biological, material, and preparation points of view, such as using different stem cells, ceramics, and metals, and their corresponding properties for bone tissue engineering applications. In addition, factors such as porosity, surface chemistry, hydrophilicity and degradation behavior that affect scaffold success are introduced. Besides, the most widely used production methods that result in porous materials are discussed. Gene delivery and secretome-based therapies are also introduced as a new generation of therapies. This review outlines the positive results and important limitations remaining in the clinical application of novel bone tissue engineering materials and methods for segmental defects.

Silver and magnesium co-doped β-TCP nanoparticles as potential materials for bone tissue engineering

Silver and magnesium co-doped β-TCP nanoparticles as potential materials for bone tissue engineering

Properties of Carbonated Hydroxyapatite-Based Scaffold from Oyster Shells Composited with Honeycomb and Polyethylene Oxide for Bone Tissue Engineering Applications

Scaffold Carbonated Hydroxyapatite/Honeycomb/Polyethylene Oxide (CHA/HCB/PEO) has been obtained by freeze-drying. The bioceramic CHA used in this study was synthesized from oyster shells using precipitation. HCB and PEO were added as reinforcement materials that affect the crystallographic properties of the scaffold. This study aimed to determine the characteristics of the scaffolds for bone tissue engineering. CHA and scaffolds were characterized using Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffractometer (XRD), and Scanning Electron Microscopy (SEM). FTIR spectra and XRD graphs confirmed that the CHA produced was B-type. FTIR spectra of the scaffold showed the presence of HCB and PEO in the scaffold, which means they were homogeneously bound in the scaffold solution. XRD test results show that scaffolds' crystallinity and crystallite size tends to decrease compared to CHA. This was good because they could make cells easier to proliferate. A small-scale pore structure (micropore) was also formed in the scaffold. The porosity and pore size of the scaffold were affected by the concentration of CHA. The presence of the micropores can increase the permeability of the scaffold and facilitate cell migration. Thus, the composition of CHA/HCB/PEO scaffolds can be a good candidate material in bone tissue engineering.

Numerical study on effect of process parameters on material extrusion 3D printing (ME3DP) for porous bone tissue engineering scaffolds

Bone tissue engineering (BTE) holds promise for treating bone defects, and 3D-printed porous scaffolds are pivotal for tissue regeneration. This study explores the impact of material extrusion 3D printing (ME3DP) process parameters (i.e., layer height and extrusion temperature) on 3D-printed porous scaffolds made of polyetherimide (PEI) material for BTE. The intricate relationships shaping scaffold dimensional accuracy, residual stresses, and warpage tendencies were unveiled using comprehensive numerical simulations. Our findings reveal that higher layer heights enhance dimensional stability, especially at lower printing temperatures, reducing maximum displacements. Consequently, lower layer heights lead to higher warpage critical values. This insight is instrumental in optimizing the material extrusion 3D printing (ME3DP) process, vital for precise net shape in BTE applications. Furthermore, residual stresses also revealed a correlation between higher printing temperatures and increased residual stresses. These findings emphasize the necessity of balancing material flow, printing temperature, and layer height for scaffold quality. Therefore, the right balance between precision and mechanical stability is critical for producing high-quality scaffolds that meet BTE requirements.

Simultaneous Regulation of the Mechanical/Osteogenic Capacity of Brushite Calcium Phosphate Cement by Incorporating with Poly(ethylene glycol) Dicarboxylic Acid.

Brushite calcium phosphate cement (brushite CPC) is a prospective bone repair material due to its ideal resorption rates in vivo. However, the undesirable mechanical property and bioactivity limited its availability in clinic application. To address this issue, incorporating polymeric additives has emerged as a viable solution. In this study, poly(ethylene glycol) dicarboxylic acid, PEG(COOH), was synthesized and employed as the polymeric additive. The setting behavior, anti-washout ability, mechanical property, degradation rate, and osteogenic capacity of brushite CPC were regulated by incorporating PEG(COOH). The incorporation of PEG(COOH) with carboxylic acid groups demonstrated a positive effect on both mechanical properties and osteogenic activity in bone repair. This study offers valuable insights and suggests a promising strategy for the development of materials in bone tissue engineering.

3D printed high-precision porous scaffolds prepared by fused deposition modeling induce macrophage polarization to promote bone regeneration

Macrophage-mediated bone immune responses significantly influence the repair of bone defects when utilizing tissue-engineered scaffolds. Notably, the scaffolds’ physical structure critically impacts macrophage polarization. The optimal pore size for facilitating bone repair remains a topic of debate due to the imprecision of traditional methods in controlling scaffold pore dimensions and spatial architecture. In this investigation, we utilized fused deposition modeling (FDM) technology to fabricate high-precision porous polycaprolactone (PCL) scaffolds, aiming to elucidate the impact of pore size on macrophage polarization. We assessed the scaffolds’ mechanical attributes and biocompatibility. Real-time quantitative reverse transcription polymerase chain reaction was used to detect the expression levels of macrophage-related genes, and enzyme linked immunosorbent assay for cytokine secretion levels. In vitro osteogenic capacity was determined through alkaline phosphatase and alizarin red staining. Our findings indicated that macroporous scaffolds enhanced macrophage adhesion and drove their differentiation towards the M2 phenotype. This led to the increased production of anti-inflammatory factors and a reduction in pro-inflammatory agents, highlighting the scaffolds’ immunomodulatory capabilities. Moreover, conditioned media from macrophages cultured on these macroporous scaffolds bolstered the osteogenic differentiation of bone marrow mesenchymal stem cells, exhibiting superior osteogenic differentiation potential. Consequently, FDM-fabricated PCL scaffolds, with precision-controlled pore sizes, present promising prospects as superior materials for bone tissue engineering, leveraging the regulation of macrophage polarization.

Performance of 3D printed porous polyetheretherketone composite scaffolds combined with nano-hydroxyapatite/carbon fiber in bone tissue engineering: a biological evaluation

Polyetheretherketone (PEEK) has been one of the most promising materials in bone tissue engineering in recent years, with characteristics such as biosafety, corrosion resistance, and wear resistance. However, the weak bioactivity of PEEK leads to its poor integration with bone tissues, restricting its application in biomedical fields. This research effectively fabricated composite porous scaffolds using a combination of PEEK, nano-hydroxyapatite (nHA), and carbon fiber (CF) by the process of fused deposition molding (FDM). The experimental study aimed to assess the impact of varying concentrations of nHA and CF on the biological performance of scaffolds. The incorporation of 10% CF has been shown to enhance the overall mechanical characteristics of composite PEEK scaffolds, including increased tensile strength and improved mechanical strength. Additionally, the addition of 20% nHA resulted in a significant increase in the surface roughness of the scaffolds. The high hydrophilicity of the PEEK composite scaffolds facilitated the in vitro inoculation of MC3T3-E1 cells. The findings of the study demonstrated that the inclusion of 20% nHA and 10% CF in the scaffolds resulted in improved cell attachment and proliferation compared to other scaffolds. This suggests that the incorporation of 20% nHA and 10% CF positively influenced the properties of the scaffolds, potentially facilitating bone regeneration. In vitro biocompatibility experiments showed that PEEK composite scaffolds have good biosafety. The investigation on osteoblast differentiation revealed that the intensity of calcium nodule staining intensified, along with an increase in the expression of osteoblast transcription factors and alkaline phosphatase activities. These findings suggest that scaffolds containing 20% nHA and 10% CF have favorable properties for bone induction. Hence, the integration of porous PEEK composite scaffolds with nHA and CF presents a promising avenue for the restoration of bone defects using materials in the field of bone tissue engineering.

Osphronemus goramy scales-derived type 1 Collagen induces RUNX2 and Osteocalcin expression: An in vivo Study

Introduction: Alveolar bone defects need bone augmentation therapies by subtituting with bone material. Gourami (Osphronemus goramy) fish scale comprises type 1 collagen and it has been used as scaffolding material in bone tissue engineering. As alternative bone graft material, the scales have a big potency to promote osteogenesis in periodontal bone defect when autografts are not feasible. This study will analise Runx2 and Osteocalcin expression in wistar rat alveolar bone induced by type 1 collagen derived from gourami fish scale. Methods: 32 male Wistar rats were divided into four groups; control group—7 days (C7), treatment group—7 days (P7), control group—14 days (C14), and treatment group—14 days (P14). The left mandibular incisivus was extracted and the tooth socket was treated with 10mg collagen. The rats were euthanized (at day 7th and 14th) and immunohistochemistry was performed using monoclonal antibodies anti-RUNX2 and anti-osteocalcin. Results: After seven days and 14days, the expression of RUNX2 and osteocalcin in the treatment group increased significantly (p<0.05) compared with the control group. Conclusion: Type 1 collagen from gourami (Osphronemus goramy) fish scales increases RUNX2 and osteocalcin expression as a bone growth marker.

Synthesis of pure and Cd-doped hydroxyapatite for the photo-catalytic degradation of Amoxicillin and Ciprofloxacin: Crystallographic characterization using XRD

Nanosized hydroxyapatite (HAp) is considered an elementary material for artificial bone tissue engineering and the applications are expanding and one of them is the photocatalytic degradation of environmentally hazardous pollutants. In this research, HAp nanoparticles, in pure form and doped with cadmium (Cd), were synthesized using a conventional wet-chemical precipitation method. Additionally, the synthesized samples such as pure and Cd-doped HAp were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV–Vis spectroscopy. Moreover, the XRD analysis allowed for a detailed estimation of the crystallite size, assisting in their tailoring of increased photocatalytic activity. The crystallite sizes of the nano-crystallite Hap were evaluated using the Scherrer Method (SM), Williamson-Hall Method (WHM), Size-Strain Plot (SSP), Halder-Wagner Method (HWM), and Sahadat-Scherrer Method (SSM). The models confirmed the formation of nano crystallite hydroxyapatite in pure and doped form. Cadmium doping in HAp showed great photocatalytic activity for example at 150 min, 31 % amoxicillin and 52 % ciprofloxacin were degraded upon 1.5 wt % Cd doping in HAp crystal. The research demonstrated that doping Cd in HAp crystal improved photocatalytic activity towards antibiotic solution (ciprofloxacin and amoxicillin) under all test circumstances.

Effects of aligned PLGA/SrCSH composite scaffolds on in vitro growth and osteogenic differentiation of human mesenchymal stem cells.

Strontium (Sr) has important functions in bone remodeling. Incorporating strontium-doped α-calcium sulfate hemihydrate (SrCSH) into poly(lactic-co-glycolic acid) (PLGA) fibrous scaffolds were expected to increase its bio-activity and provide a potential material for bone tissue engineering. In the present study, Sr-containing aligned PLGA/SrCSH fibrous scaffolds similar to the architecture of natural bone were prepared via wet spinning. CCK-8 assay revealed that Sr-containing scaffolds possessed better bioactivity and supported favorable cell growth effectively. The aligned PLGA/SrCSH fibers exerted a contact effect on cell attachment, inducing regular cell alignment and influencing a series of cell behaviors. Releasing of high concentration Sr from a-PLGA/SrCSH scaffolds could induce high expression levels of BMP-2, increase ALP activity and upregulate RUNX-2 expression, and further promote the expressions of COL-I and OCN and the maximum mineralization. This study demonstrated that Sr and ordered structure in a-PLGA/SrCSH fibrous scaffolds could synergistically enhance the osteogenic differentiation of umbilical cord mesenchymal stem cells (UCMSCs) by regulating cell arrangement and expressions of osteogenic genes.

Magnesium-Doped Nano-Hydroxyapatite/Polyvinyl Alcohol/Chitosan Composite Hydrogel: Preparation and Characterization.

Polyvinyl alcohol/Chitosan hydrogel is often employed as a carrier because it is non-toxic, biodegradable, and has a three-dimensional network structure. Meanwhile, Magnesium-doped nano-hydroxyapatite(Mg-nHA) demonstrated high characterization to promote the osteogenic differentiation of bone marrow derived mesenchymal stem cell(BMSCs). Therefore, in order to develop a porous hydrogel scaffold for the application of bone tissue engineering, an appropriate-type Mg-nHA hydrogel scaffold was developed and evaluated. A composite hydrogel containing magnesium-doped nano-hydroxyapatite (Mg-nHA/PVA/CS) was developed using a magnetic stirring-ion exchange method and cyclic freeze-thaw method design, with polyvinyl alcohol and chitosan as the main components. Fourier transform infrared spectra (FTIR), electron energy dispersive spectroscopy (EDS), X-ray photoelectron spectrometer (XPS) and scanning electron microscopy (SEM) were employed to analyze the chemical structure, porosity, and elemental composition of each hydrogels. The equilibrium swelling degree, moisture content, pH change, potential for biomineralization, biocompatibility, the osteogenic potential and magnesium ion release rate of the composite hydrogel were also evaluated. SEM analysis revealed a well-defined 3D spatial structure of micropores in the synthesised hydrogel. FTIR analysis showed that doping nanoparticles had little effect on the hydrogel's structure and both the 5% Mg-nHA/PVA/CS and 10% Mg-nHA/PVA/CS groups promoted amide bond formation. EDS observation indicated that the new material exhibited favourable biomineralization ability, with optimal performance seen in the 5% Mg-nHA/PVA/CS group. The composite hydrogel not only displayed favourable water content, enhanced biocompatibility, and porosity (similar to human cancellous bone), but also maintained an equilibrium swelling degree and released magnesium ions that created an alkaline environment around it. Additionally, it facilitated the proliferation of bone marrow mesenchymal stem cells and their osteogenic differentiation. The Mg-nHA/PVA/CS hydrogel demonstrates significant potential for application in the field of bone repair, making it an excellent composite material for bone tissue engineering.

Enhanced bone regeneration by osteoinductive and angiogenic zein/whitlockite composite scaffolds loaded with levofloxacin.

Promoting angiogenesis following biomaterial implantation is essential to bone tissue regeneration. Herein, the composite scaffolds composed of zein, whitlockite (WH), and levofloxacin (LEVO) were fabricated to augment bone repair by facilitating osteogenesis and angiogenesis. First, three-dimensional composite scaffolds containing zein and WH were prepared using the salt-leaching method. Then, as a model antibiotic drug, the LEVO was loaded into zein/WH scaffolds. Moreover, the addition of WH enhanced the adhesion, differentiation, and mineralization of osteoblasts. The zein/WH/LEVO composite scaffolds not only had significant osteoinductivity but also showed excellent antibacterial properties. The prepared composite scaffolds were then implanted into a calvarial defect model to evaluate their osteogenic induction effects in vivo. Micro-CT observation and histological analysis indicate that the scaffolds can accelerate bone regeneration with the contribution of endogenous cytokines. Based on amounts of data in vitro and in vivo, the scaffolds present profound effects on improving bone regeneration, especially for the favorable osteogenic, intensive angiogenic, and alleviated inflammation abilities. The results showed that the synthesized scaffolds could be a potential material for bone tissue engineering.

Research progress of biomedical polymer materials in bone tissue engineering

Defects, defects and dysfunctions caused by disease, surgery or aging are among the most important threats to human health. Although organ transplantation and surgical reconstruction rehabilitation treatment measures have saved or prolonged a small number of lives, they still have shortcomings and limitations. Biomedical polymer materials have great potential in bone tissue engineering, and with the progress of material science, molecular biology, medicine and other fields, their application in bone tissue engineering is becoming more and more extensive. This paper introduces the types and polymer properties of biomedical polymer materials in bone tissue engineering, and introduces and prospects the current development of biomedical polymer materials in the field of bone tissue engineering.

Advances in the Application of Photothermal Composite Scaffolds for Osteosarcoma Ablation and Bone Regeneration.

Photothermal therapy is a promising approach to cancer treatment. The energy generated by the photothermal effect can effectively inhibit the growth of cancer cells without harming normal tissues, while the right amount of heat can also promote cell proliferation and accelerate tissue regeneration. Various nanomaterials have recently been used as photothermal agents (PTAs). The photothermal composite scaffolds can be obtained by introducing PTAs into bone tissue engineering (BTE) scaffolds, which produces a photothermal effect that can be used to ablate bone cancer with subsequent further use of the scaffold as a support to repair the bone defects created by ablation of osteosarcoma. Osteosarcoma is the most common among primary bone malignancies. However, a review of the efficacy of different types of photothermal composite scaffolds in osteosarcoma is lacking. This article first introduces the common PTAs, BTE materials, and preparation methods and then systematically summarizes the development of photothermal composite scaffolds. It would provide a useful reference for the combination of tumor therapy and tissue engineering in bone tumor-related diseases and complex diseases. It will also be valuable for advancing the clinical applications of photothermal composite scaffolds.

Effect of Different Contents of 63s Bioglass on the Performance of Bioglass-PCL Composite Bone Scaffolds

Bioactive glasses (BG), notably 63s BG, possess distinct properties such as biodegradability, biocompatibility, and the ability to boost cellular interactions. Our research concentrated on formulating polycaprolactone (PCL) porous scaffolds enriched with 63s BG to gauge their combined mechanical and biological potentials. Using twin-screw extrusion, we created composites containing 5%, 10%, and 20% 63s BG. These were transformed into cylindrical scaffolds using 3D printing. Our assessments involved melt flow, SEM, XRD, water contact angle metrics, DSC, and extracorporeal degradation. After co-culturing with MC3T3-E1 cells, an uptick in alkaline phosphatase activity was noted. Preliminary findings demonstrated that as 63s BG content increased, the properties of the composites improved. Yet, they fell short of replicating the mechanical nuances of cortical bone, rendering them inapt for load-bearing orthopedic applications but suitable for mending minor bone defects or cartilage. In summary, while 63s BG brings about significant advancements in scaffold attributes, attaining the mechanical traits ideal for certain medical purposes remains elusive. This investigation offers foundational insights for the evolution of optimized bone tissue engineering materials.

[Application of gelatin microspheres in bone tissue engineering].

Gelatin microspheres were discussed as a scaffold material for bone tissue engineering, with the advantages of its porosity, biodegradability, biocompatibility, and biosafety highlighted. This review discusses how bone regeneration is aided by the three fundamental components of bone tissue engineering-seed cells, bioactive substances, and scaffold materials-and how gelatin microspheres can be employed for in vitro seed cell cultivation to ensure efficient expansion. This review also points out that gelatin microspheres are advantageous as drug delivery systems because of their multifunctional nature, which slows drug release and improves overall effectiveness. Although gelatin microspheres are useful for bone tissue creation, the scaffolds that take into account their porous structure and mechanical characteristics might be difficult to be created. This review then discusses typical techniques for creating gelatin microspheres, their recent application in bone tissue engineering, as well as possible future research directions.

[Preparation and properties of silica/hydroxyapatite whiskers porous ceramics scaffold].

To investigate the preparation and properties of the novel silica (SiO 2)/hydroxyapatite (HAP) whiskers porous ceramics scaffold. The HAP whiskers were modified by the SiO 2 microspheres using the Stöber method. Three types of SiO 2/HAP whiskers were fabricated under different factors (for the No.1 samples, the content of tetraethoxysilane, stirring time, calcination temperature, and soaking time were 10 mL, 12 hours, 560℃, and 0.5 hours, respectively; and in the No.2 samples, those were 15 mL, 24 hours, 650℃, and 2 hours, respectively; while those in the No.3 samples were 20 mL, 48 hours, 750℃, and 4 hours, respectively). The phase and morphology of the self-made HAP whisker and 3 types of SiO 2/HAP whiskers were detected by the X-ray diffraction analysis and scanning electron microscopy. Taken the self-made HAP whisker and 3 types of SiO 2/HAP whiskers as raw materials, various porous ceramic materials were prepared using the mechanical foaming method combined with extrusion molding method, and the low-temperature heat treatment. The pore structure of porous ceramics was observed by scanning electron microscopy. Its porosity and pore size distribution were measured. And further the axial compressive strength was measured, and the biodegradability was detected by simulated body fluid. Cell counting kit 8 method was used to conduct cytotoxicity experiments on the extract of porous ceramics. The SiO 2 microspheres modified HAP whiskers and its porous ceramic materials were prepared successfully, respectively. In the SiO 2/HAP whiskers, the amorphous SiO 2 microspheres with a diameter of 200 nm, uniform distribution and good adhesion were attached to the surface of the whiskers, and the number of microspheres was controllable. The apparent porosity of the porous ceramic scaffold was about 78%, and its pore structure was composed of neatly arranged longitudinal through-holes and a large number of micro/nano through-holes. Compared with HAP whisker porous ceramic, the axial compressive strength of the SiO 2/HAP whisker porous ceramics could reach 1.0 MPa, which increased the strength by nearly 4 times. Among them, the axial compressive strength of the No.2 SiO 2/HAP whisker porous ceramic was the highest. The SiO 2 microspheres attached to the surface of the whiskers could provide sites for the deposition of apatite. With the content of SiO 2 microspheres increased, the deposition rate of apatite accelerated. The cytotoxicity level of the prepared porous ceramics ranged from 0 to 1, without cytotoxicity. SiO 2/HAP whisker porous ceramics have good biological activity, high porosity, three-dimensional complex pore structure, good axial compressive strength, and no cytotoxicity, which make it a promising scaffold material for bone tissue engineering.

Advances in new materials for bone tissue engineering simplifying postoperative rehabilitation: Recent Scientific Breakthroughs

Introduction: Bone tissue engineering has emerged as a promising field in regenerative medicine, aiming to develop innovative materials and approaches for bone repair and regeneration, which also leads to the simplification and search for new approaches in postoperative rehabilitation. The integration of novel materials into scaffolds and implants plays a crucial role in improving bone tissue engineering strategies. In recent years, scientific research has made significant progress in identifying and characterizing novel materials with superior properties and functionalities.
 Aim: This article explores the most recent scientific findings and research breakthroughs concerning novel materials for bone tissues, focusing on their biocompatibility, mechanical properties, bioactivity, and potential clinical applications.
 Conclusion: In recent years, the field of bone tissue engineering has witnessed remarkable advancements in the development of novel materials for bone repair and regeneration, which also simplify the medical rehabilitation of the patient. From bioactive glasses and calcium phosphate-based materials to biodegradable magnesium-based materials and graphene-based composites, researchers have explored a wide range of materials with diverse properties and functionalities. As the field continues to evolve, the integration of cutting-edge technologies, such as 3D printing and nanotechnology, is expected to further enhance the efficacy and clinical relevance of these novel materials, ultimately benefiting patients with bone defects and diseases.

Improving physio-mechanical and biological properties of 3D-printed PLA scaffolds via in-situ argon cold plasma treatment

As a bone tissue engineering material, polylactic acid (PLA) has received significant attention and interest due to its ease of processing and biocompatibility. However, its insufficient mechanical properties and poor wettability are two major drawbacks that limit its extensive use. For this purpose, the present study uses in-situ cold argon plasma treatment coupled with a fused deposition modeling printer to enhance the physio-mechanical and biological behavior of 3D-printed PLA scaffolds. Following plasma treatment, field emission scanning electron microscopy images indicated that the surface of the modified scaffold became rough, and the interlayer bonding was enhanced. This resulted in an improvement in the tensile properties of samples printed in the X, Y, and Z directions, with the enhancement being more significant in the Z direction. Additionally, the root mean square value of PLA scaffolds increased (up to 70-fold) after plasma treatment. X-ray photoelectron spectroscopy analysis demonstrated that the plasma technique increased the intensity of oxygen-containing bonds, thereby reducing the water contact angle from 92.5° to 42.1°. The in-vitro degradation study also demonstrated that argon plasma treatment resulted in a 77% increase in PLA scaffold degradation rate. Furthermore, the modified scaffold improved the viability, attachment, and proliferation of human adipose-derived stem cells. These findings suggest that in-situ argon plasma treatment may be a facile and effective method for improving the properties of 3D-printed parts for bone tissue engineering and other applications.